PRODUCTS
2Plastic refining characteristics of several common rubber
1: natural rubber and natural rubber more easy to obtain plasticity. The initial viscosity of low viscosity and low viscosity standard maleic rubber is generally not required to be refined. If other types of standard rubber Mooney viscosity is greater than 60, will still be plastication. Natural rubber mixing machine mixing, roller temperature is 30 DEG -40 DEG, time is about 15-20min. When the temperature reached 120 degrees Celsius, the time was about 3-5min. When the addition of plasticizer or plastic solution
2: natural rubber and natural rubber more easy to obtain plasticity. The initial viscosity of low viscosity and low viscosity standard maleic rubber is generally not required to be refined. If other types of standard rubber Mooney viscosity is greater than 60, will still be plastication. Natural rubber mixing machine mixing, roller temperature is 30 DEG -40 DEG, time is about 15-20min. When the temperature reached 120 degrees Celsius, the time was about 3-5min. When the addition of plasticizer or plastic solution
-
On-site training. More insight into the applications, more development.
2019-10-19 -
Safety is no small matter. Make safety your first thought and take precautions from tiny things.
2019-10-19 -
What Is Pulley Lagging
2019-10-21 -
Introduction of Pulley Lagging Installation Procedures
2019-10-21 -
Factors Affecting Wear Resistance of Pulley Lagging
2019-10-21 -
Advantages of Pulley Lagging
2019-10-21 -
Introduction of Wear Liners
2019-10-21
-
Significant Features of Wear Resistant Compound Steel Wear Plate
2019-10-21 -
Introduction of Conveyor Skirt Board and How to Install it
2019-10-21 -
Introduction of Belt Cleaner
2019-10-21 -
Features and Types of Belt Cleaners
2019-10-21 -
Introduction of Impact Bed
2019-10-21 -
Advantages of Impact Bed
2019-10-21 -
Design of Impact bed
2019-10-21
